纳米Co/rGO磁性复合吸附材料的制备及对Cu2+的吸附性能

以改进Hummer法制备的薄片状氧化石墨烯(GO)为载体和模板负载钴离子，然后采用原位还原法制得纳米金属Co/石墨烯磁性复合吸附材料(Co/rGO)，并将其应用于对Cu2+的吸附和脱除，以期为高效可复用的铜离子脱除剂的合成与应用提供指导。实验结果证实，Co/rGO复合材料具有超顺磁性，能够很方便的使用磁铁进行分离并在无磁场情况下振荡分散。Co/rGO复合材料对Cu2+具有稳定的吸附/脱附性能，实验条件下对Cu2+的最大吸附容量达到117.5 mg/g且5 min内实现吸附平衡，远优于其原料GO的60 min吸附容量27.6 mg/g。本工作系统考察了NaOH加入量、络合剂种类、溶剂种类等关键因素对Co粒子在rGO载体上形貌和分布特性的影响，比较了不同合成条件下的复合材料对Cu2+吸附效果的影响，并对优选条件下制备的Co/rGO复合材料进行了FT-IR, XRD, SEM表征。研究结果表明，纳米Co/rGO磁性材料对Cu2+的吸附过程更符合Freundlich模型，属于多层吸附。室温下吸附焓ΔH=17.81 kJ/mol，吸附反应平衡常数Kθ=3.65。当初始Cu2+浓度为39.22 mg/L时，对Cu2+的吸附率为93.47%，五次吸附/脱附循环后吸附容量仍保持在初始值的94%，每次吸附后溶液中残余Cu2+浓度均满足钴电解液对杂质铜离子的浓度去除要求(5 mg/L)或GB 8978-1996污水综合排放标准3级(2 mg/L)，有望在相关领域发挥作用。     

Fe基非晶合金增强1060铝基多层复合材料的组织与性能

采用累积叠轧焊+中间退火法复合轧制1060Al/Fe基非晶多层铝合金复合板材。利用光学显微镜、扫描电镜、X-衍射分析仪以及拉伸试验机分析Al基复合材料的微观组织结构变化、断口形貌、物相组成以及力学性能。结果表明:Fe基非晶复合材料的增强体在300 ℃中间退火过程中发生部分晶化,在累积变形轧制过程中发生破碎,并随着变形道次的增加,破碎程度随之增大;复合板前6道次的累积轧制变形出现了明显的加工软化现象,并且随着变形道次的增加,其加工软化的效果愈明显;随着累积轧制变形道次增加,Al基复合材料的力学性能发生了明显的变化,第2道次轧制变形后屈服强度与抗拉强度达到了最大值为140 MPa和156 MPa,伸长率为5.53%,达到最佳综合性能。     

基于近似测地线的分层次自动铺带轨迹规划方法

自动铺带技术是一种增量制造技术，适用于制造翼面、壁板等大尺寸、小曲率复合材料构件，具有加工成本低、效率高等特点。轨迹规划是自动铺带技术的关键环节，它直接关系到复合材料构件的成型精度与质量。现有的自动铺带轨迹规划方法难以便捷兼顾调控铺放间隙与防止铺放褶皱，保证铺带产品的最终质量。有鉴于此，提出了一种基于近似测地线的分层次铺放轨迹规划方法。主要目标是合理利用预浸带允许变形能力，在防止铺放褶皱产生的前提下，保证相邻带料不产生覆盖，且间隙不超过2.5 mm。首先，研究了铺放间隙的产生与演化规律，给出了几种典型曲面上初始铺放间隙的优化方法。接下来，提出了近似测地线的数学模型与求解格式。然后，基于铺放褶皱的产生机制与铺放间隙的演化规律，确定了近似测地线的测地曲率大小与符号。最后，在双曲面模具以及自由曲面模具上验证了所提出方法的有效性。     

玻璃纤维增强建筑用聚乙烯树脂复合材料的性能

采用剥离测试方法来表征制得的玻璃纤维增强建筑用聚乙烯树脂复合材料的界面黏结强度,并对其进行红外光谱、接触角、微观组织测试与分析。研究结果表明:采用浸润剂处理可以使玻璃表面生成新基团;浸润剂能够提高玻璃表面接触角,从而更易与树脂形成浸润状态,由此改善玻璃和树脂的界面结合状态,实现界面黏结特性的显著优化。在剥离测试中发现经浸润剂处理后,玻璃可以和树脂之间形成更强的界面结合作用;树脂从玻璃表面发生剥离之后,形成了光滑的玻璃片,同时还有部分纵横交错的划痕。     

Distribution-free composite Shewhart-GWMA Mann-Whitney charts for monitoring the process location

The Mann-Whitney (MW) statistic is one of the most recommended two-sample statistical tests when the assumption of normality fails to hold due to its robustness and fascinating properties especially when small sample sizes are involved. In order to improve the sensitivity of the generally weighted moving average (GWMA) monitoring scheme toward the detection of large shifts, in this paper, a new distribution-free phase II composite Shewhart-GWMA (CSG) scheme is proposed using the MW U statistic. The performance of the proposed scheme is investigated using the average run-length (ARL) and average extra quadratic loss (AEQL) values through extensive simulations. The performance of this newly proposed monitoring scheme is found to be superior when compared to numerous memory-type MW schemes (some existing and others introduced in this paper) in many situations. An illustrative example is given to demonstrate the implementation of the CSG MW U scheme using real-life data.     

Interconnected SiC–Si network reinforced Al–20Si composites fabricated by high pressure solidification

The microstructures and mechanical properties of the interconnected SiC–Si network reinforced Al–20Si composites solidified under high pressures were investigated. The results demonstrate that the complete interconnected SiC–Si network can be obtained by high pressure solidification, and the connected micron-sized pores are uniformly distributed in the interconnected SiC–Si network. The compressive strength and microhardness of the SiC/Al–20Si composites solidified under 3 GPa were 723 MPa and 229 HV_0.05, respectively. Furthermore, the fracture process of SiC/Al–20Si composites was studied by in situ TEM tensile testing. The result shows that the crack first initiated and propagated at the Al/Si interface under an external load, and the SiC particles in the interconnected SiC–Si network can effectively hinder the crack propagation, thus enhancing the strength.     

Preparation and characterization of Cf/Pollucite composites through geopolymer precursors

Continuous carbon-fibre-reinforced Cs-geopolymer composite (C_f/CsGP) were prepared, and its in-situ conversion was investigated during high-temperature treatments. The effect of treatment temperature on the thermal evolution process and mechanical properties of the resulting products were systematically evaluated. The results indicated that the crystallization temperature of C_f/CsGP composite was considerably delayed because the amorphous structure of carbon fibres was not conducive as a nucleation substrate for pollucite derived from the CsGP matrix. Moreover, the integrity of the corresponding resulting products derived from the C_f/CsGP composite were damaged due to thermal shrinkage that occurred during the high-temperature treatment process. When treatment temperature was ≤1200^oC, the mechanical properties of the corresponding products exhibited an upward trend, which was ascribed to the improvement of the densification degree of the resulting composite and well interface-bonding state between carbon fibres and pollucite. However, the mechanical properties of the resulting composites decreased with the treatment temperature continued increased from 1200 to 1400^oC. This phenomenon was attributed to the impairment of fibre properties caused by interfacial reactions.